|
The 910
provides 20 channels of thermocouple and voltage measurement at 16 bit
resolution and 1uV integrity. Fitted with specialised thermocouple
connectors it gives an accuracy of 0.5° C achieved on the higher output
thermocouple types. The module supports most popular thermocouples and
has the ability to monitor their health and report errors i.e.
breakdowns or deteriorates. The 910 can be programmed to integrate
signals to be measured over one complete mains cycle (50 or 60Hz) and
can reject large amounts of mains borne interference superimposed on
the on microvolt signals. During measurements the interference is
continually monitored and should it exceed the dynamic range of a
measurement mode in use it can be reported or a higher range selected.
Measurements can be made continuously or under direct command from a
host computer and can be returned in one of several formats that is
most convenient for the supervisory software on the host computer.
Especificaciones:
Número de
canales por módulo: 20
No de polos por módulo: 2
Connector type input channels: Isothermal screw terminal
Measurement modes: microvolts DC, millivolts DC, Thermocouple, Ambient
temperature, Sensor health
Measurement
ranges: 12V, 1.5V, 180mV, 23mV
Measurement resolutions: 17 bit @ 40/sec ,14 bit @ 200/sec
Thermocouple types: K, J, T, R ,S ,E ,B ,N
|