Adaptadores para Pulsos externos

Para la estación meteorológica HOBO Weather Station HWS

The Pulse Input Adapters are ideal for connecting a wide range of sensors with pulse outputs such as tipping-bucket rain gauges, flow meters, power meters and gas meters. These adapters, which count the number of pulses per logging interval, require a HOBO Weather Station or HOBO Micro Station for operation.

Adaptador de de Entrada para Pulsos Electrónicos Ref.: S-UCA-M006

- Compatible with electronic switch closures, such as FET or open collector outputs, or CMOS-level logic signals
- Maximum input frequency: 120 Hz (120 pulses per second)

- Lockout time: 45 microseconds ±10%

- Preferred pulse polarity*: Active low

Ref.: S-UCA-M006

Adaptador de de Entrada para Pulsos y Contactos libres de tensión Ref.: S-UCB-M006

- Contact closures, such as tipping bucket rain gauges or reed switches
- Maximum input frequency: 2 Hz (2 pulses per second)

- Lockout time (for switch debounce): 327 milliseconds ±10%

- Preferred switch type*: normally-open

Ref.: S-UCB-M006

Rango de Medida

Measurement Range: 0-4093 counts per logging interval (data must be exported for conversion to other units)

Minimum Pulse Width: 1 ms

Maximum input voltage: 3.6V

Minimum input voltage: -0.3V

Logic levels: low ≤0.6V; high ≥2.7V

Edge detection: falling edge

Input/Output impedance: 100 kilohms

User connection: 2-wire input (24 AWG wire; 2 wire nuts included)

Cable length: 6.5m

Weight: 310 g

# Data Channels: 1

* Pulses of opposite polarity can be used, but battery usage rate will be higher.

Equipos Instrumentación y Control S.L.

Urbanización Prado Norte, c/ Fresno 1 – bis 28110 Algete – MADRID

Telf.: 91 628 0817 Fax: 91 628 0453 Email: info@eiccontrol.com