Registrador de Dióxido de Carbono (CO2) TelAire 7001

Sensor Telaire 7001 CO2 * (requiere CABLE-CO2 para conectar al los registradores H8 y U12 )

  • Measures and displays CO2 and Temperature simultaneously
  • Outputs CO2 data to HOBO H8 or HOBO U12 logger with external input channels (up to 2500 ppm) – requires CABLE-CO2
  • CO2 accuracy (sensor only): ±50 parts per million (ppm) or ±5% of reading, whichever is greater
  • CO2 resolution: ±1 ppm
  • Response time: <60 seconds to 90% of step change
  • Operates off 6 VDC from external AC/DC Adaptor (included)
  • Operates off four AA batteries (not included), 70+ hours operation typical
  • Uses patented Absorption Infrared® technology for CO2 measurement

* Note: Not for use with Intrinsically Safe (IS) loggers

Registrar valores de Dióxido de Carbono (CO2) con el Monitor Telaire 7001 CO2, con cualquiera de los registradores HOBO Multicanal.

Some models include other built-in sensors (e.g., temperature and/or relative humidity) or have the capability to accept additional external probes and input cables (e.g., temperature, CO2, 4-20mA, DC voltage) for more complete Indoor Air Quality (IAQ) or HVAC system studies.

· Solicitar Información

Telaire CO2 Monitor

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Equipos  Instrumentación  y  Control  S.L.

Urbanización Prado Norte, c/ Fresno  1 – bis  28110 Algete – MADRID  Telf.: 91 628 0817  Fax: 91 628 0453  Email: info@eiccontrol.com