Registradores de Datos de la Familia HOBO^® U9

Características y Especificaciones

· Rango operativo: -20° a 70°C, 0 to 95% relative humidity, non-condensing

· Programmable Start time/date or Push-button start

· Blinking LED indicates current state

· Capacity: 26K to 43K time-stamped state changes (typical, based on state-change interval)

· HOBO Shuttle for convenient in-field data readout and logger relaunch

· Ethernet Server option allows for networking multiple U-series loggers

· Battery level indication at launch

· Battery level can be recorded as separate channel

· 1-year battery life (typical)—user-replaceable CR2032 lithium battery

· Numerous event types (button push/release, host PC connection, low battery) stored to data file asynchronously during logging

· Hinged case snaps open for easy battery replacement

· Time Accuracy: approximately +/-1 min/month at 25°C

· Logger size: 6.0 x 4.7 x 1.9 cm (2.4 x 1.9 x 0.8")

· Peso: aprox. 28 gramos

· Patented technology (U.S. Patent 6,826,664)

Especificaciones de Medida

Registrador de Estado (U9-001)
Monitors when doors are open/closed using an internal magnetic reed switch and external magnet. External input cable included to monitor contact closures of remote devices or presence of positive DC voltages up to 15V. The State logger may be used with the CSV-A8 Current Switch.

Especificaciones del Registrador
Espacio entre el imán y el registradorr:
Open: ≥0.75 in
Closed: ≤0.25 in
Contact closure resistance:
Open: > 300K ohms
Closed: < 15K ohms

Registrador de Luz on/off (U9-002)
El umbral de intensidad de luz monitorizado es ajustable entre 10 a 100 lumens/m² (luz flourescente). The HOBO’s light sensitivity is peaked in the forward direction and can be taken advantage of to minimize the effect of other light sources when trying to determine the on/off state of a particular light source.

Especificaciones del Registrador
Light threshold adjustment range: 10 to 100 lumens / meters² (fluorescent light) @ room temp. The sensor’s sensitivity to incandescent light is about ten times greater.

Registrador de Motor on/off (U9-004)
The Motor on/off logger senses the magnetic field created when an AC motor turns on. It attaches easily to the motor housing without requiring any wiring. The logger must be mounted very close to (ideally directly on) the field source, as magnetic field intensities fall off rapidly with increasing distance from their source (motor, transformer, or even a single wire carrying a large AC current). Mount the logger on or close to the motor housing or to one phase of the power line to the equipment being monitored.

Especificaciones del Registrador
AC magnetic field threshold: 750mGauss @ 60 Hz (depending on distance and orientation)

Software Requerido

El Software HOBOware™ para Windows® se requiere para operar los registradores HOBO U9. Cada kit de Software incluye software, USB cable interfaz, y manual del software.

Referencias para Pedidos

Descripción		Referencia
	Data Logger
	HOBO U9 State (w/ cable & magnet)	U9-001
	HOBO U9 Light on/off	U9-002
	HOBO U9 Motor on/off	U9-004


	Software
	HOBOware® Software for Windows	BHW-PC

	Accesorios
	HOBO U-Shuttle	U-DT-1
	AC Current Switch	CSV-A8

_· Solicitar información sobre el producto

HOBO U12 Stainless Temperature Logger with Food Grade Housing and Extended Temp Range

Ref. U9-001 de Estado

HOBO U12 Stainless Temperature Logger with Food Grade Housing and Extended Temp Range

Ref. U9-002 de Luz On/Off

HOBO U12 Stainless Temperature Logger with Food Grade Housing and Extended Temp Range

Ref. U9-004 de Motor On/Off

Los registradores U9 memorizan el tiempo
y la duración de cambio de estados,
luz on/off o motor on/off

U12 Stainless Temp Logger Accuracy Graph
Los valores en Gris no se registran

Equipos Instrumentación y Control S.L.

Urbanización Prado Norte, c/ Fresno 1 – bis 28110 Algete – MADRID

Telf.: 91 628 0817 Fax: 91 628 0453 Email: info@eiccontrol.com