1290 Amplificador de Potencia
Características
Principales
Max applied polarization level
50V / 25A
Test techniques include Pstat /
Gstat, ramps, cyclic
voltammetry, pulse tests, ohmic
drop, impedance
Frequency Range 10uHz to 10kHz
Impedance Range <1mohm to
>100kohm
Compatible with Solartron
potentiostats including
1280B, 1285, 1287, 1470 and 1480
Compatible with Solartron FRAs
including 1250, 1253,
1255, 1260 (but system must
include a potentiostat)
Software de PC
CellTest - Battery, Fuel Cell
test program provides
charge / discharge cycling,
pulse, impedance
CorrWare - DC, cyclic voltammetry
ZPlot (with FRA) –
Impedance
Funciones
Wide polarization range (50V /
25A) for studies of a wide variety of energy
storage devices.
Boosts potentiostat voltage and
current - potentiostat voltage is
multiplied by 10 and current is
multiplied by 10,000 (maximum
voltage 50V, maximum current 25A)
4-terminal measurements essential for accurate measurements of low impedance devices such as
batteries and fuel cells.
10uHz - 10kHz frequency range allows impedance characterisation of cells (series resistance,
diffusion, electrode
investigations, etc.)
Pulse techniques - for analysis of series resistance components in energy sources.
Remote control from the
potentiostat – automatic switch on and
off during the experiment is
controlled by the potentiostat.
For 1470 and 1480, the 14701A option must be fitted for the booster to
operate correctly. In the case of
1280B, 1285, 1287, these instrument need to have the remote
control board fitted. This board
is now fitted as standard but for all older units, a retrofit will be
required. The unit will need to
be returned to service for this to be fitted.
The 1290 is not compatible
with 1286, 1284, 1280A and 1287s older than mod strike A10 (mid-1995)
Aplicaciones y Usuarios
Test types - Pstat / Gstat DC Polarization scans, cyclic voltammetry, impedance
Applications - Battery / Fuel Cell / Ultra-capacitor charge - discharge cycling,
series resistance tests
and impedance tests,
Electroplating, Etching , Electrochemistry
Usuarios Típicos
Universities (electrochemistry
research departments), automotive manufacturers (new 42V batteries
for cars), aerospace / military
(power sources for satellites, missiles, torpedoes etc), electric vehicle
power source manufacturers,
national labs, battery / fuel cell / supercapacitor research labs.
1290 Power Booster - 50V / 25A
lots of
power for testing batteries, fuel
cells,
ultra-capacitors...
Accesorios del Sistema
Compatible Electrochemical /
Energy Storage Test Systems
12608W - Full electrochemical
test system (1MHz freq. range) 1287, 1260, ZPlot and Corrware
12558WB - Electrochemical system
(1MHz freq. range) 1287, 1255B, ZPlot and Corrware
12508W - Intermediate echem
system (65kHz freq. range) 1287, 1250B, ZPlot and Corrware
1280Z - Electrochemical system
(20kHz freq. range)
147055B - Multi-channel Battery
Test System (1MHz range) 1470, 1255, CellTest
148055B - Multistat Test System
(1 MHz range) 1480, 1255, CellTest, Multistat ZPlot / CorrWare
Nota 1: For 1470 and 1480, the
14701A option must be fitted (controls the booster)
Nota 2: when the 1290 Power
Booster is used the frequency bandwidth is reduced to 10kHz
for the above systems.
|